#Mmtool aptio 4.50.0023 drivers#
#Mmtool aptio 4.50.0023 update#
#Mmtool aptio 4.50.0023 windows 10#
#Mmtool aptio 4.50.0023 windows 8#

Today I have done the promised tests with my Z68 system. I could successfully boot off the SSD but there was no video output at UEFI level, which did not sit well with me)

#Mmtool aptio 4.50.0023 windows 8#

OS Type -> Other OS (I did not manage to get it to work with OS Type set at Windows 8 or Windows 8 WHQL, even with CSM off. Well, there are a few UEFI settings I had to change:

#Mmtool aptio 4.50.0023 windows 10#

Windows 10 installation has been done using a bootable USB stick with the Intel SSD being the only other hard drive connected. That's all, I have been able to boot off the Intel SSD 750 ever since. I extracted the three NVMe modules (nvme, nvmesmm, nvmeint13) using MMTool and added those modules to my original BIOS for the Z77X-UD3H. So I simply took Fernando's advice and downloaded the latest BIOS version from one of Gigabyte's Z97 boards (I guess it was Z97X-UD3H). It has been working for a few weeks now as the lone drive under Windows 10 Pro.Īt first, I simply tried to boot off the SSD with the latest UEFI version for the Z77X-UD3H with no success. Just wanted to post my successful experience getting my Intel SSD 750 to work as primary boot drive on a Gigabyte Z77X-UD3H. I currently don't have an NVMe SSD to test so I'm relying on secondary sources.

#Mmtool aptio 4.50.0023 drivers#

Please read this important message from lordkag: RE: Full NVMe support for older Intel Chipsets possible! - 11įernando's feedback to lordkag: RE: NVMe-Support: Only drivers or EFI-modules necessary? - 8Īnother person's feedback: RE: NVMe BIOS Modules and NVMe Support - 12 Please read this thread for current development: NVMe BIOS Modules and NVMe Support Thanks to Fernando, lordkag, CodeRush from win-raid for all the help, research and development. Repeat step 12 and 14 again for NvmeSmm and NvmeInt13 Load the NVMe.ffs module click on the button insert.ġ5. In the insert tab and in the Insert FFS Options and choose the option Insert Compressed.ġ4. Open your own Motherboard BIOS in MMTOOL4.ġ3. Find the various Modules named Nvme, NvmeSmm, NvmeInt13.ġ1. Choose the option 'Extract Uncompressed'ħ. For X79 you can try the Z97 or X99 modules to see which one works.Ħ. if you have a Gigabyte Z77 Motherboard then download Gigabyte Z97 BIOS. Download your vendor's Z97 BIOS such as ASUS, Gigabyte, EVGA and etc i.e. Please see this page (or the Author's Link above) for instructions.Disclaimer: Win-raid, Tweaktown and me are not liable or responsible if you brick your motherboard. Nevertheless it is possible to modify an AMI Aptio type V BIOS by using CodeRush's UEFITtool, which is part of the UBU tool package.

#Mmtool aptio 4.50.0023 update#

That is why the UBO tool may not be able to update all BIOS modules of AMI Aptio V BIOSes (the tool will only show the version of the currently inserted BIOS modules). Unfortunately, the currently available AMI Aptio V MMTool v5.0.0.7 has problems with the update of certain BIOS modules of the latest Intel chipset mainboards (X99 and newer). v5.0.0.7 (for the newest Aptio V BIOSes) and supports all Intel and AMD platform BIOSes.

The UBU tool uses the AMI Aptio MMTools v4.50.0.23 (for the older Aptio IV BIOSes) resp.

Insert a BIOS module, which is not present within the original BIOS or remove a BIOS module.

This tool cannot be used, if you want to modify any other BIOS type (Award/Phoenix, non-UEFI AMI or Intel mainboard BIOSes) or.

Of any AMI UEFI BIOS (except BIOSes from X99 chipset mainboards). various 'Universal TRIM in RAID0 modified' ones) and

UEFI BIOS Updater can detect the versions of the OROM/EFI modules, which are inside an AMI UEFI BIOS file and update:Ī) the most important OROM/EFI modules (inc.